Paper plastic separation and cleaning machine
The separation function is good to separate pulp and plastic from paper mill waste, milk box, wrapping paper, paper cup, paper cup, PP bag and so on. It can be separated without heating and chemical liquid, water can be recycled, and the utilization value can be improved. Because the separation effect is good, the separated pulp and plastic are very clean, the plastic can be granulated, the paper can be made of pulp, all can achieve new value. It is the first choice for making plastic particles and making pulp and pulp. The machine has the advantages of small footprint, large output, low energy consumption, simple operation and convenient maintenance. It is an advanced equipment with good separation effect. Recycled fiber can be used for paper making. Plastic can be granulated and regenerated. It has the characteristics of simple structure and thorough separation of paper and plastic.
Paper plastic separation and cleaning machine
The separation function produced by Qingdao Powertech Machinery is very good to separate pulp and plastic from paper mill waste, milk box, wrapping paper, paper cup, paper cup, PP bag and so on. No heating, direct separation of chemical Yao liquid and water recycling can be used to improve the utilization value. Because the separation effect is good, the separated pulp and plastic are very clean, the plastic can be granulated, the paper can be made of pulp, all can achieve new value. It is the first choice for making plastic particles and making pulp and pulp. The machine has the advantages of small footprint, large production, low energy consumption, simple operation and convenient maintenance. It is the most advanced and best equipment in China.
Usage method
1.When paper and plastic are decomposed, it is necessary to add water before starting and running, and then put into raw materials. Generally, the material must be loaded to 2/3 of the cylinder.
2.It is observed that the water discharged from the pulp outlet can be discharged when the slurry is not slurry. The whole time of each tank (refer to the feed is broken to the slag) is usually 3-10 minutes depending on the variety of the raw material.
3.The pulping should go into the filter pool and be filtered and spare.
4.Slag discharge should enter the plastic washing pond, and the plastic conveyor should be airlifted from the end of the washing tank with screw conveyor.